'FIE' Computerize dBrinell Hardness Tester, Model: B300 - PC is a simple and aaccurate means to produce and automatically measure the ball indentation to give Brinell hardness number
These testers are suitable for measuring the hardness of metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed. These testers strictly confirm to IS : 1500-2.
The robust machine frame is designed to accommodate the high precision loading system and an optical device with CCD camera. Specimen is placed on testing table and brought in contact with clamping cone. Load / Unload / Read operations are done through a3 - position hand lever. The image is digitalized using a CCD camera fitted on the optical device and is captured by the PC. The diameters of the indentation are directly measured by PC to give the Brinell hardness number directly
Testing Table 200mm dia | 1 No. |
Testing Table 70mm dia. with 'V groovefor round jobs 10 to 80mm dia | 1 No. |
Ball holder 5mm | 1 No. |
Ball holder 10mm | 1 No. |
Test Block HBW-5/750 | 1 No. |
Test Block HBW-10/3000 | 1 No. |
Allen Spanner | 4 Nos. |
Telescopic cover for elevating screw protection | 1 Set |
Electric Cord | 1 No. |
USB device for Video | 1 No. |
Test Loads | kgf | 250 to 3000 in stages of 250 kgf. |
Magnification of objectives | - | 4 X |
Maximum Test Height | mm | 380 |
Scale least count | mm | 0.01 |
Throat Depth | mm | 200 |
Weight (Approx) | mm | 450 |
Power Supply | V / Cy / Ph | 415 / 50 / 3 |
Measurement Range | mm | 1 - 6 |