Computerized Brinell Hardness Tester, Model : B3000 - PC - FA is fabricated from steel plate sand is designed forprecise loading system.
It is fully automatic machine for production testing
Ones the job is placed on testing table and press "Cycle start" button the job is raised and brought in contact with clamping device.
Then loading operation starts. After preset dwelling timer, unloading operation starts. As soon as load is fully removed, the indenter is swiveled and the image is digitalized using a CCD camera fitted on machine and captured by the PC.
The diameter of indentation is measured by PC and the Brinell hardness is displayed on monitor with help of" state of the art" technology software. The job is lowered down and here the auto cycle is over.
Operationally the machine can be operated after lapse of interval without operation of push button, so that operator has only to do loading and unloading of job on machine.
This tester is designed for measuring hardness of metallic parts with wide testing range from soft to hard and its accurate results are widely acclaimed.
This tester confirms to IS : 1500 - 2
Testing Table 200mm dia | 1 No. |
Testing Table 70mm dia. with 'V groovefor round jobs 10 to 80mm dia | 1 No. |
Ball holder 5mm | 1 No. |
Ball holder 10mm | 1 No. |
Test Block HBW-5/750 | 1 No. |
Test Block HBW-10/3000 | 1 No. |
Allen Spanner | 4 Nos. |
Telescopic cover for elevating screw protection | 1 Set |
Electric Cord | 1 No. |
USB device for Video | 1 No. |
Instruction Manual | 1Book |
Test Loads | kgf | 250 to 3000 in stages of 250 kgf. |
Magnification of objectives | - | 4 X |
Maximum Test Height | mm | 380 |
Scale least count | mm | 0.01 |
Throat Depth | mm | 200 |
Weight (Approx) | mm | 450 |
Power Supply | V / Cy / Ph | 415 / 50 / 3 |
Measurement Range | mm | 1 - 6 |